eBay Classifieds » All ads » Jobs » 

electrical in Flint

(1-20 of 45 ads)
View as:
Categories
  1. Automotive Technician - Michigan State Certified at Belle Tire

    They must be certified (State of MI/ not applicable in OHIO or INDIANA), knowledgeable and have experience in areas covered by the ASE certification programs...

  2. Software Strategist at General Motors

    BSE, BS / MS in Mechanical Engineering, Electrical Engineering, and Computer Science. The Transmission Software Strategist (SWS) will lead the Controller System...

  3. Component Cost Engineer - Powertrain at General Motors

    Mechanical, Electrical, Manufacturing,. True cost in collaboration with Design Engineers, Purchasing Buyers and....

  4. Lead Cost Engineer - Powertrain at General Motors

    Engineering (mechanical, materials, electrical, aerospace, manufacturing, metallurgical,. Develop plans and lead Cost Engineering activities to....

  5. Transmission Design Release Engineer at General Motors

    BS in Mechanical Engineering (or Electrical Engineering, Manufacturing Engineering) or equivalent training. All qualified applicants will receive consideration...

    Ads
    1. Electrician Journeyman

      Qualified applicant will have a current State of Michigan Electrical License, be dependable and have good customer relations.Install and repairs electrical systems and equipment within the scope of the job.If hired, applicant will supervise apprentice electricians and effectively manage the job site thru the completion of the project.Knowledge of applicable electrical codes, standards and ...

    1. Sr. System Engineer (Automotive) at Munro & Associates, Inc.

      Identify and define, mechanical, electrical, signal, power, data, and hydraulic, pneumatic, and fluid interfaces among subsystems....

    1. Field Service Technician

      Atlas Technologies, the world leader in Press Room Automation is seeking an experienced and energetic Field Service Technician for the installation, start up and debug of our equipment. The Field Service Technician will also be required to perform repairs on existing equipment at our customers facilities. Must be able to read and interpret electrical, pneumatic, hydraulic, and mechanical ...

    1. Sr Controls Engineer at Scott Industries

      Confidently read electrical and pneumatic drawings and be able to troubleshoot. $38-$42/HR....

    1. Maintenance Technician

      Express Employment Professionals of Howell/Brighton is looking for a Maintenance Tech. If you are looking for a new opporutnity with a company that believes in training, education and advancement opportunities and you are seeking a Direct Hire opportunity for a 2nd shift maintenance technician position please apply immediately for this position!. Must be mechanically inclined and have ...

    1. Property Maintenance Technician at Paragon Properties

      HVAC, electrical, mechanical, painting, plumbing, and carpentry. We are seeking experienced, dependable and hard-working Maintenance Technicians with previous...

    1. Service Technician

      Jobs in this category are responsible for providing professional, timely, and courteous customer service in the installation, alignment, brake, and mechanical areas of the Automotive Center. Individuals should be working towards or have completed ASE Certification.Job Duties/Responsibilities:* Diagnoses and repairs to specifications - brake and hydraulic, exhaust, primary and/or advanced fuel ...

    1. Automotive Costing Engineer at Munro & Associates, Inc.

      Bachelor’s degree in Engineering in one of the following disciplines Mechanical, Electrical, Manufacturing, Aeronautical, Computer Science and/or Computer...

    1. Machine Automation & Controls Engineer - Grand Blanc, MI

      Company with a broad range of products including small plastic components with complex geometry, thin walls, undercuts, and 'snap in' capabilities seeks individual who can perform hands-on PLC programming and troubleshooting, vision system and sensor integration and testing, coordinate new controls equipment purchase, and control system integration for automated assembly equipment. ...

      No PartTime
      No Contract
      No Internship
      No Freelance
      No Telecommute

    1. Automotive Mechanic at Belle Tire

      They must be certified, knowledgeable and have experience in areas covered by the ASE certification programs (Engine Repair, Transmissions, Drive Train/Axles,...

    1. Field Service Technician

      Express Employment Professionals in Howell/Brighton is looking for a Field Service Tech who can work with a manufacturer of precision measurement & testing equipment with experience working on industrial machinery & experience in the following areas: Read & interpret Electrical, Mechanical & Pneumatic Machine DrawingsProgrammable Logic Controllers (Allen Bradley, Siemens Step 7/ ...

    1. Maintenance Tech (PT)-026PINE at Lockwood Management

      Troubleshoot and repair HVAC, electrical, plumbing, carpentry, concrete, masonry and landscaping items, as required by specific capabilities list....

    1. Pipelayer

      Responsible for assembling, connecting and constructing pipe systems for storm or sanitary sewers, drains and water mains. Must know and practice safety policies and proceduresHand dig to expose existing pipe or utilities (gas, water, sewer, electric etc) in trench areaGuide excavator operator in trench excavation Hand shape trench bottom to accommodate pipe installationHand shape pipe ...

    1. Delivery Driver at Advance Auto Parts

      What is a Delivery Driver ? Entry level store position capable of supporting delivery of parts to commercial customers. The role has the responsibility to...

    1. Machine Maintenance Technician

      Lapeer based manufacturer is seeking an experienced machine maintenance technician.   - Must have a strong electrical experience   - Experience repairing and maintaining conveyors, racks and robots   - Hydraulic, Pneumatic and Mechanical experience is a plus   - This is a 3rd shift opportunity with potential to move to 1st shift

    1. Driver / Installer at Signarama - Flint, MI

      We are looking for a Sign Installer/Production Associate to produce, and install all types of high quality signage. Candidate will interact with our customers

    1. Electrician Residential Service Technician

      Mister Sparky is looking for an exceptional and experienced residential service Electrician. We are the best of the best! Looking for RESIDENTIAL SERVICE ELECTRICIANS in the Brighton, MI area.Our chosen candidate looks like–• Has strong residential service experience• Very clean cut a must, takes pride in their apperance• Great customer service and customer communication skills a MUST.• An ...

    1. Solar Inspection Technician at Horizon Solar Power

      Electrical apprentice card is preferred. Open electrical panels & junction boxes so the inspector can observe inside....

    1. Technician Diesel - Heavy Truck (16001117)

      Equal Opportunity Employer: Minority/Female/Disability/Veteran Waste Management (WM), a Fortune 250 company, is the leading provider of comprehensive waste and environmental services in North America. We are strongly committed to a foundation of operating excellence, professionalism and financial strength. WM serves nearly 25 million customers in residential, commercial, industrial and ...

    1. Senior Solar Designer at Horizon Solar Power

      Perform electrical load calculations. Review existing electrical components and match proposed solar equipment....

    1. Controls Designers

      3 Openings Total - Can choose between two locations (Fenton or Saginaw)Must have electrical/controls design experience using either Solidworks or AutoCADExperience with E-Plan is a plus - they are willing to train on e-plan if you do not have experienceNo travel

    2. Maintenance Technician

      Express Employment Professionals of Howell is looking for a Maintenance Tech. If you are looking for a new opporutnity with a company that believes in training, education and advancement opportunities and you are seeking a Direct Hire opportunity for a 2nd shift maintenance technician position please apply immediately for this position!. Must be mechanically inclined and have experience with ...

    3. Field Service Technician

      Express Employment Professionals in Howell is looking for a Field Service Tech who can work with a manufacturer of precision measurement & testing equipment with experience working on industrial machinery & experience in the following areas: Read & interpret Electrical, Mechanical & Pneumatic Machine DrawingsProgrammable Logic Controllers (Allen Bradley, Siemens Step 7/ TiaPortalHuman Machine ...

    4. Electric Controls Engineer

      Great direct hire opportunity in Fowlerville, MI. Skills needed: Computer skillsOrganizing resources and establishing priorities and goalsExamine and re-engineer operations and procedure, and developing and implementing new strategies and proceduresDetermine the kinds of tools and equipment needed to do a job.Program in software/applications such as: RS Logix 5000, RS Linx, SLC 500, RS Logix ...

    5. Maintenance Technician

      Maintains manufacturing equipment and completes machine troubleshooting and upgrade projects. Works to minimize manufacturing machine downtime, micro stoppages and improve efficiency.PRINCIPAL DUTIES AND RESPONSIBILITIESMaintains, and repairs manufacturing equipment.Maintains, and repairs facility related equipment.Completes preventive and corrective repairs.Ability to safely troubleshoot and ...

    6. Senior Maintenance Tech

      Position information:As the Maintenance and Grounds expert of your community you will be responsible for completing work orders to maintain and repair physical structures of buildings and grounds.• Keeping apartment and community buildings in a clean and orderly condition• Ensuring that the physical aspects of the property meet the company’s established standards and applicable laws• ...

    7. Field Service Technician

      Manufacturer of precision measurement & testing equipment  with experience working on industrial machinery & experience in the following areas: Read & interpret Electrical, Mechanical & Pneumatic Machine DrawingsProgrammable Logic Controllers (Allen Bradley, Siemens Step 7/ TiaPortalHuman Machine InterfaceVFD Motor ControlServo Motion ControlRobot Interface & Programming (ABB, FANUC, ...

    8. Delivery Driver

      What is a Delivery Driver?Entry level store position capable of supporting delivery of parts to commercial customers. The role has the responsibility to deliver parts to our commercial customers and assist with task and inventory processes in the store. This position can be part time or full time and must be MVR certified.Primary Responsibilities_ Safely deliver parts to customers as needed_ ...

    9. Delivery Driver

      What is a Delivery Driver?Entry level store position capable of supporting delivery of parts to commercial customers. The role has the responsibility to deliver parts to our commercial customers and assist with task and inventory processes in the store. This position can be part time or full time and must be MVR certified.Primary Responsibilities_ Safely deliver parts to customers as needed_ ...

    10. Salesperson

      What is a Salesperson?Entry level sales position capable of supporting the DIY business and achieve our sales and service objectives. The role has good knowledge of store systems, basic automotive system knowledge and basic part knowledge. The role has the basic ability to source from stores, hubs, pdq, and external suppliers. The role has in-depth knowledge of the store inventory and ...

      1. Sr Transmission Design Release Engineer at General Motors

        BS in Mechanical Engineering (or Electrical Engineering, Manufacturing Engineering) or equivalent experience....

      2. Manufacturing Engineer – Electro-Mechanical Manufacturing / Automotive at Pontiac Coil, Inc.

        Experience with product functional testing including electrical testing, force testing, machine vision implementation....

      3. Global Front Wheel Drive Transmission Calibration Engineer at General Motors

        BSE, BS in Mechanical Engineering, Electrical Engineering. Transmission Calibration Engineer....

      4. Engine Hardware Controller Design Release Engineer at General Motors

        Knowledge of vehicle electrical systems. Gather controller requirements from controls stakeholders (including electrical architects, packaging, software and....

      5. Journeyman Electrician/Foreman at EL Electrical Contracting

        This position requires a leader, a positive team builder that executes quality electrical installations. Well established and growing electrical contractor...